Cooling - Controlling water temperature

The introduction of the Cooper S proved to be a testing time for the Mini’s systems, but conveniently provide a guideline as to what the standard cooling system was capable of - that used on the ‘S’ was marginal to say the least!

It wasn’t uncommon for many S’s to spew water from their overflow pipes when ever it was doing anything other than a steady 70 miles an hour, over-heating eventually caused through water loss. Perhaps some deductions can be made from the following…

There are a number of elements involved in controlling water temperature. Some confusion over what to sort first when over-heating occurs leads to wasted time and money, and possibly terminal engine damage. Maximum power is usually generated from A-series engines at 70 – 75 degrees C (160 to 170 degrees F). The main problem with this on a road car is the oil’s unlikely to get hot enough for maximum performance – the results outlined previously.

Lubrication - Temperature critical

The correct running temperature of the oil is perhaps even more important than the water/coolant temperatures - so let us consider how to control them.

Mainly because it seems to be the most misunderstood of the whole process, and oil cooler fitment almost a reflex when over-heating occurs where a tuned engine of any type is concerned. And in many cases on standard production road cars for that matter.

Almost since the appearance of the immortal Cooper S, fitting an oil cooler has been the essential thing to do to any tuned Mini without any comprehension why. The original fitment was necessary because oil and bearing technology wasn't too advanced. Asking an oil of yester-year to cope with lubricating an engine at racing speeds, and a gearbox pushed their performance to the edge of their all too narrow capability, so extreme control over their working environment was essential for reliability. Hence oil cooler fitment.

SUSPENSION - Terminology

Glossary of terms used in the suspension on the mini. The Mini has consistently more than proven its capability in competition with very limited and cost-effective modifications based on the standard equipment fitted. Having first ensured the bodyshell (in reality little more than a complex bracket to hold suspension and driver securely in place) is well sorted out by removing all cruddy or rotten metalwork and into something like straight, square and strong we, maximising suspension stability and geometry pays dividends in the enjoyment that is driving a Mini. Understanding what the individual ingredients are helps in pursuing what you want from the experience. Smooth Mover Good, reliable, and consistent handling is dependent on a number of factors. At this stage, we’re concerned with clapped out or badly adjusted suspension components. Stiff, seized, partially seized or slack, sloppy, worn out suspension components will cause inconsistent, wayward, confusing and – more important

SUSPENSION - Basic Priorities

Suspension - Basic priorities for improved suspension performance. Having studied the 'Suspension - Terminology' article you should now have a ‘job description’ understanding of previously possibly un-comprehended words associated with suspension control. Now - what to do with it? The first thing we need to establish is an order of priority before distributing hard-earned 'beer vouchers' in all directions. Fortunately, this is a good deal less complicated than is generally believed. Despite the five main factors that control the front suspension geometry – kingpin inclination, caster angle, camber angle, track, and bump-steer – we are only really able to alter three of those easily. King-pin inclination is non-adjustable, as it’s a feature of where the swivel-pins are mounted on the hub at the factory. It will alter as other adjustments are made, but we can do nothing easily about correcting/optimising it independently, as these are fixed in position on the swivel hub.

Camshaft Design

Elgin Cams is a company that is a direct descendent of such famous California specialists as Isky, Delong, Winfield, etc. etc. Elgin has taken the art of cams into the science of the '90's. Computer designed and handcrafted workmanship guarantee a first class camshaft. Custom designed cams are a specialty. Part No Applications: CAM001, CAM002, CAM003, CAM004, CAM005, CAM006, CAM007 Elgin has made cams or sold his design to General Motors, Ford Motor Co., Nissan Corp., Zakespped International, Porsche Motor Sports, Winston Cup "Engine Builders. Elgin has the largest percentage of cams used at the SCCA Runoffs from GT-1 to Formula-V. He also has provided original or new technology for antique and vintage racers. Much information has been recorded about the four stroke internal combustion engine and yet only a small percentage of people really understand how it works and fewer people know how to modify an engine to suit their needs.

Gearbox - Up-rating diffs and FDs

There’s a good selection of straight-cut final FDs available. Examine the FD table, and using information from

'Gearbox - Final dives, standard' and 'Gearbox - Formulae for car speed, etc.'

you can assess which would best suit your usage. Bear in mind that they’re noisy, make sure you select one that’ll fit your diff unit, and also consider that using drop gears will allow fine-tuning of the ratio where necessary. See

'Gearbox - Up-rating drop gears'

Gearbox - Up-rating diffs, FDs and ancillaries.

part numbers: C-BTA166, C-BTA167, DAM6624, BTA101, 2A7062, DAM5071, DAM6027, RPS1418, C-AJJ3385, C-22A1731, ...Read more

Brakes. Pad Types and Choices

I know I keep dragging this one out for an airing but it’s continually ignored by far too many folk - the only way to get the best from what you have is to be totally honest with yourself about your Min’s main usage. Delusions of grandeur cause severe disappointment, and tears before bedtime. Fitting a set of pads to your road Mini because you think you drive like Michael Schumacher, and your Mini’s built around a ‘race’ theme, with ‘race-spec’ brakes is going to get you into severe bother. Nine

Despite a particular pad type having a high ‘Mu’ designate doesn’t mean to say it’ll give you the best braking potential. They’re generally made in a harder compound so may also give unacceptable levels of disc wear, noise output (squeal), or judder. A pad that gives excellent performance at lower temperatures may have unacceptable pad wear, and create excessive corrosive dust.

So what you need is a pad tha...

Brakes - How They Work

This time we’re going to look at just how brakes do what they do, and ways to improve them. Without a doubt the most important point to get sorted at the outset is just what makes brakes do their thing - FRICTION. The sole purpose of the brake set-up on any vehicle .....

Brakes - Fundamental Considerations

When looking to increase their cars performance, most folks immediately turn to considering higher engine power outputs. Because of this pre-occupation brakes tend to slide down the improvements priority list. However, they are far more important - being able to accelerate at warp speed to hyper-space in the twinkling of an eye is all very well, but disastrous if you can’t stop. You will make a very big hole in the scenery, and possibly end up wearing an wooden over-coat. Getting the braking system sorted out can help to make the car quicker, as you will be able to more confidently, therefore maximising speed in any given situation. Being one of those ‘sciences’ used in the automotive industry I hope to shed some light on the subject as it's another of those where many questions from confused and mislead folks that clog up my e-mail board. The advent of the Metro, and the brakes used on it has spawned a lot of activity in this direction. It was soon discovered that they could b

Brakes - Pads, Function and Parameters

The past few years have witnessed a great deal of activity in the brake-swapping department by Mini enthusiasts world wide. The reasons are quite diverse, ranging from fashion to necessity. Some fit vented Metro 4 pot brakes because it’s the ‘in’ thing to do, giving max pose value. Some believe it’s a performance improvement, usually misguided by a misinformed vendor hell bent on making a sale. Some do it because they’ve been given a Metro, and their Mini’s endowed with drum-brakes. Some fit 7.5” S-type brakes because they want to fit 10” wheels on their late-type Mini. Some fit them because the racing discipline they compete in won’t allow anything else. Some even fit the disastrous 7” Cooper-type because it’s all they have. Whatever the reason or type of disc-brake set-up used, the effectiveness of the installation can be honed to perfection by the type of brake pads fitted. Indeed, using the correct brake pad on a current set-up could out perform any intended swap, such is their in

Brakes - Pipe End Flares

One day I'm going to have to try and assess just how it is that every now and again I get a 'run' on folks asking me about a specific problem. These problems exist all year round, year in, year out. And said problems crop up throughout the year. But - every now and then there's a blood-rush on a certain issue. Just recently that issue has been brake pipe ends. The bit that seals the pipe off against it's relevant fitting. There are two types of end - male and female. The male end is convex in shape, the female concave. The male end is used where a male pipe union (nut) is used on the brake pipe - that's a nut with an external thread - that will be screwed into a female fitting such as found in a wheel cylinder or master cylinder. The female end is used where a female pipe union (nut) is used on the brake pipe - a nut with an internal thread - and will be mated to a male fitting such as found on rear flexible brake pipes. Under no circumstances should you mix the too up as the brake p

Brakes - Silicone brake Fluid

To use or not to use - that is the question! BRAKES - Silicone brake fluid, to use or not to use - that is the question! Over more recent years I've had affair number of discussions on the use of silicone brake fluid as opposed to the more common type. I have to say some folk are vehemence in their belief that this stuff is 'the answer' to all kinds of brake maladies. Some time ago I contacted the two major brake specialists in this country (UK) to see what they had to say. Their reactions was as vehemence as those believers above. For what it's worth, I thought I'd spread the word according to the manufacturers - which happens to be similar to my limited experience with this 'liquid savior'. Some has heralded silicone-based brake fluid as being the last word in brake fluid, yet also brings a look of horror onto the faces of some. The classic car folk swear by it, particularly for vehicles that are not used much where brake seal failure can be experienced, and because it does not

Cylinder Head - Unleaded Fuel Use

The specter of 'unleaded fuel only' - instigated in UK on January 1st 1999 and seemingly from decades ago across the rest of the world - seems to be forcing more and more folk into frightened, panic orientated action. And Mini owners are featuring heavily in this. See bottom for useful part numbers. The situation not at all being helped by all sorts of conflicting information from 'leaned' sources, such as lead levels in humans has declined greatly since 1935 - despite the rapidly expanding ownership of petrol-burning vehicles. And benzene and toluene used in unleaded fuels are cancerous. Still, the powers that be are relentlessly forcing through the 'no heavy metals in fuel' bills, not being at all put off by such trivia. Not surprising bearing in mind the complete debacle on the catalytic converter front - the type decided on for world wide and universal use was developed and tested in California!

Cylinder Head - Unleaded Fuel Use

The specter of 'unleaded fuel only' - instigated in UK on January 1st 1999 and seemingly from decades ago across the rest of the world - seems to be forcing more and more folk into frightened, panic orientated action. And Mini owners are featuring heavily in this. See bottom for useful part numbers. The situation not at all being helped by all sorts of conflicting information from 'leaned' sources, such as lead levels in humans has declined greatly since 1935 - despite the rapidly expanding ownership of petrol-burning vehicles. And benzene and toluene used in unleaded fuels are cancerous. Still, the powers that be are relentlessly forcing through the 'no heavy metals in fuel' bills, not being at all put off by such trivia. Not surprising bearing in mind the complete debacle on the catalytic converter front - the type decided on for world wide and universal use was developed and tested in California!

Cylinder Heads - Valves, Shape, Material and Finish

For the very good and simple reason it minimised airflow obstruction by having the least amount of material in the way. Very plausible, and a design that many have stayed with to this day - surprising considering the magnitude of expertise housed in the more recognised A-series tuners. Probably something along the lines of 'if it ain't broke, don't fix it', or perhaps (and more likely?) 'Can't teach an old dog new tricks'.

However, as time and technology progressed, man's ever-inquisitive nature started to determine more exactly what and why - and airflow activity was not passed over. Not only 'how much' was being measured, but 'where and how' to further determine where improvements could be made. After all - it has long since been realised that the engine is essentially an air pump. The more you get in, the more you get out, so improving the air's tortuous route to the cylinder has to help.

Engine - 998 Tuning, Bolt-ons

The 998cc engine is a very robust and tunable unit. It is also the most common engine found in standard Minis. See bottom for useful part numbers Terminology: MSC/MM - Mini Spares Centre/Mini Mania ID - Inside Diameter OD - Outside Diameter BBU - Big Bore Unit (refers to all 1275cc-based units) SBU - Small Bore Unit (refers to all sub-1275cc units, here the 998) BHP - Brake Horse Power LCB - Long Centre Branch Despite the lure of the much-advertised 1380cc alternatives, many simply want to get a little more from what they have at reasonable outlay. The single biggest restriction on any standard Mini is the 'breathing apparatus' - anything that is connected to the induction and exhaust systems. The standard exhaust being the biggest culprit - it is desperately restrictive in the name of noise suppression and cheapness of manufacture. Oddly enough it also increases fuel consumption when tested over a better designed, fre

Engine - Running in Procedure

This is another of those subjects that crops up on the message board frequently. I am constantly surprised by the number of engine builders - or people who charge other folk for building engines at any rate - that never hand out such an information sheet. It seems pretty daft to me that having taken a wad of money off of a customer for an engine you've lovingly put together, you'd want to help that person get the very best out of the engine. And the running/breaking in procedure is absolutely crucial. It at least ensures no damage is incurred when the engine first bursts into life. A collection of the usual suspects have explained their own methods on the board, along with various others - many of which probably work just as well for them, a few which are down-right dubious. Following is a sheet I administer with every customer engine I build.

Air filtration - K&N Air cleaner test.

In the forefront of Mini tuning, improving the over-all breathing capability of the very asthmatic A-series the air filter set-up is one that sees priority attention. All the widely available (and widely varying) stage one tuning kits include at the very least a replacement - and hopefully - high-flow air filter element to fit into the standard plastic case,

In the past few years (well, must be nearly 6 years by now!) since I got involved with writing for the specialist Mini Magazines I have been continually fighting with the problem of limited space. This has limited what I have been able to cover, both in subjects and in details. Up until recently (say the past year or so) I have been covering fairly broad topics in a fairly broad terms and detail. Basically trying to cover perhaps the most popular areas dabbled in by the Mini owning masses.

Cylinder head - Min Tec head range

I'm often asked about the range of cylinder heads I do for Mini Spares/Mini Mania, so here's the low-down…

Although the following range of heads accommodate specific fitments - like pre-1992 where by-pass hoses and heater take-offs on the clutch end of the head are used and post-1992 where neither of these exist, and on SPi (single point injection) heads where they don't usually have a threaded hole for the temperature sender - in reality it is easy to convert almost any of them to fit any other engine since holes are easily blocked off - or by-pass hoses not used, water pumps blanked off and drilled thermostats fitted (see articles on cooling/engine transplants). A list of which is what and what to do to each to convert is at the end of this article.

For more in-depth descriptions of the head specs, see article 'Cylinder head - About Min Tec Heads' - basically the valve sizes used have been decided on after extensive and in-depth flow test...

Cylinder head - Torque-down and head gasket problems

This is to help those floundering in an unknown sea of techno-babble and 'magical' cures… Part No Applications: C-AHT288, CAM150, CAM151, TAM1617, CAM4545, 51K1193, TAM1521, GEG300, C-AHT188, C-STR1057, A regular visitor to the message board, and something I am asked frequently about in my other incarnations for other technical media. Generally when something has gone badly wrong! Many folks have just as many ways of dealing with the following subjects - all can and will claim their way has worked for them for the proverbial millennia - so a few words as a basic reference and guide as I see them; we all know there are always exceptions to the rules. This is to help those floundering in an unknown sea of techno-babble and 'magical' cures…