MS82 Right Hand Petrol Tank - Fitting Kit Instructions

Fitting kit instructions for MS82 Right Hand Petrol Tank

1. 21A2183 Right hand tank (NOT PART OF KIT)
2. 14A7057 Tank neck grommet
3. 21A1329 Tank stand
4. 2A2226 Tank strap upper...

SUSPENSION - Basic set-up method

Time to arrange all those agonised over, carefully selected and applied suspension components to give of their best.

Suspension - Basic set-up method

part numbers: TOOL10, TOOL11, HILO, HILO-01

Time to arrange all those agonised over, carefully selected and applied suspension components to give of their best.

This is one of those subjects viewed as a ‘black art’, largely because of lack of understanding and confusion. The confusion part is because folk encompass the whole suspension set-up deal with suspension arrangement and design, lack of understanding instilling terror at the thought of ‘fiddling’ with the suspension components. The latter also fuelled by the knowledge that expensive specialist measuring equipment is needed. Well, there is no black art – you can work the magic. More a case of a long day...

Cylinder Head - Unleaded Fuel Use

The specter of 'unleaded fuel only' - instigated in UK on January 1st 1999 and seemingly from decades ago across the rest of the world - seems to be forcing more and more folk into frightened, panic orientated action. And Mini owners are featuring heavily in this. See bottom for useful part numbers. The situation not at all being helped by all sorts of conflicting information from 'leaned' sources, such as lead levels in humans has declined greatly since 1935 - despite the rapidly expanding ownership of petrol-burning vehicles. And benzene and toluene used in unleaded fuels are cancerous. Still, the powers that be are relentlessly forcing through the 'no heavy metals in fuel' bills, not being at all put off by such trivia. Not surprising bearing in mind the complete debacle on the catalytic converter front - the type decided on for world wide and universal use was developed and tested in California!

Cylinder Head - Unleaded Fuel Use

The specter of 'unleaded fuel only' - instigated in UK on January 1st 1999 and seemingly from decades ago across the rest of the world - seems to be forcing more and more folk into frightened, panic orientated action. And Mini owners are featuring heavily in this. See bottom for useful part numbers. The situation not at all being helped by all sorts of conflicting information from 'leaned' sources, such as lead levels in humans has declined greatly since 1935 - despite the rapidly expanding ownership of petrol-burning vehicles. And benzene and toluene used in unleaded fuels are cancerous. Still, the powers that be are relentlessly forcing through the 'no heavy metals in fuel' bills, not being at all put off by such trivia. Not surprising bearing in mind the complete debacle on the catalytic converter front - the type decided on for world wide and universal use was developed and tested in California!

Engine - 1098, Initial Tuning

The 1098 (1100) engine has had a lot of bad press over the years - largely because of early experiences when trying to tune the motor brought about problems with the then standard components available - they simply were not up to taking any real punishment as experienced in racing.

See bottom for useful part numbers.

This fallacy was handed down generation to generation like some scary bedtime story. Those that have used the unit in more recent years, employing more capable componentry know what a demon motor this can be. Following is an initial look at what it will do with a little modification - the results compared directly with it's smaller brother the 998 for illustration of the potential.

Abridged History
When the Mini was first conceived it ustilised a de-stroked version of the then quite remarkable 948cc A-series engine.

Frenzied activity in the Bill Sollis Racing Mini Miglia Team...

Over the course of the last two weekends there has been frenzied activity in the Bill Sollis Racing Mini Miglia Team. We have raced three times experiencing the full spectrum of highs and lows in the process!

It started at Croix en Ternois in Northern France which The Mini Se7en Racing Club visited for the first time. We had a double header to look forward to and I always enjoy the challenge....

Cooling - Controlling water temperature

The introduction of the Cooper S proved to be a testing time for the Mini’s systems, but conveniently provide a guideline as to what the standard cooling system was capable of - that used on the ‘S’ was marginal to say the least!

It wasn’t uncommon for many S’s to spew water from their overflow pipes when ever it was doing anything other than a steady 70 miles an hour, over-heating eventually caused through water loss. Perhaps some deductions can be made from the following…

There are a number of elements involved in controlling water temperature. Some confusion over what to sort first when over-heating occurs leads to wasted time and money, and possibly terminal engine damage. Maximum power is usually generated from A-series engines at 70 – 75 degrees C (160 to 170 degrees F). The main problem with this on a road car is the oil’s unlikely to get hot enough for maximum performance – the results outlined previously.

Cylinder head - Identification by casting number

A+ head castings - despite having the same 12G940 casting number - are considerably different in appearance, loosing the flat area behind the thermostat housing and around the rest of the rocker/head stud areas to a sculptured look - where these areas are replaced by a 'sunken' cast finish. The A+ castings were introduced with the appearance of the Metro in 1980, although some late 1275GTs (1979-on) had them fitted. Generally they are easily recognised by their colour - a putrid yellow on the small-bore castings and bright red on the large-bore ones, a paint finish that is VERY difficult to remove, even in a chemical tank. The MG

See bottom for useful part numbers.

Now this may not be super-sonic speed-inducing power, it could just as well be for maximum economy. In either case, it's the engines volumetric efficiency (VE) under scrutiny - it's ability to breath in as much correctly proportioned air/fuel mix as possible in any given situation.

Cylinder Head - Unleaded fuel use

The specter of 'unleaded fuel only' - instigated in UK on January 1st 1999 and seemingly from decades ago across the rest of the world - seems to be forcing more and more folk into frightened, panic orientated action. And Mini owners are featuring heavily in this.

Cylinder Head - Unleaded fuel use

The specter of 'unleaded fuel only' - instigated in UK on January 1st 1999 and seemingly from decades ago across the rest of the world - seems to be forcing more and more folk into frightened, panic orientated action. And Mini owners are featuring heavily in this.

Engineering - Consistent measurements

During a recent discussion with a few overseas Mini brethren - who were experiencing various engine-related problems - something cropped up that I have always taken as granted (in the sense of ' a standard for the application'); the matter of consistency in measurements.

Now we're not talking about the sort of measurements you make with a ruler, since discrepancies of a small nature don't tend to matter a whole lot. No, we're talking about the sort of measurements made with fine measuring instruments such as micrometers or vernier calipers.

Now, the discussion that was going on was with reference to the best clearance to run between the bore and piston for a given piston type for race or street purposes. I hade quoted figures that I generally use for both situations for forged and for cast piston types.

Fuel - Leaded/unleaded fuel and the alternatives

The fuel situation seems to be worsening at a great pace these days. And as is exhibited by the questions that appear on the message board many folk are confused by what they can and can't do, and what is best to do as far as race engines go.

Many have posted (particularly from the States) that nothing need be done - just run on unleaded. They've been doing this for years and never had any problems. I have trouble believing that in the face of what I know and have investigated - so here's what the score really is.

Years ago this stuff called Tetraethyl lead was originally conceived as an octane enhancer. It was soon discovered, however, that the metallic oxides produced by the combustion process formed a protective coating on the valves and seats. This coating prevented micro welding of the valve seat to the corresponding seat in the head under high temperature operation.

SU Carbs - The history

Practically every Mini owner can name the brilliant engineer responsible for our obsession. Many can name the man responsible for the rubber suspension spring.

A goodly number know a fair bit about the engine's heritage and the man who came up with the extremely efficient cylinder head design.They account for the biggest chunks of the Mini's anatomy. But what about that other extremely simple yet hugely effective instrument that features so prominently when engine tuning occurs - the SU carburetter? A limited few can tell you what 'SU' stands for, extremely few have any idea of its concept and evolution. So let's put that right… In the beginning Strangely enough, it all started way back with William Banks Skinner; one of the owners/directors of the well-known Lilly and Skinner footwear distributors.

MINISPARES HISTORIC RALLY TEAM - 2005 SEASON - PART1

After a major engine rebuild carried out by MED in Leicester designed to give a stronger bottom end with a fully specified crankshaft and their special high torque camshaft (STR 930) to make the car more driveable.

The S rods were smoothed, polished and whole assembly balanced giving a very usable power band from 3000 to 7000, but capable of revving to 8000 safely.

02.09.07 - Donington Park Report by Keith Calver

Once again I found myself swamped with work causing the now familiar last minute rush to check the race car over before departing to Donnington. This race weekend was going to be a very different affair than what has become the norm. Karin was having to work the weekend, my 'opposition' in my class and in another Clubby - Steve (Young) - has resigned himself to doing the last race of the year at Oulton park due to work pressures, and stats man and hospitality provider Keith (Manning – now Otto v

MINIS ON THE MANX 2008 - RETURN OF PETER HORSBURGH & ‘277 BRX’

At long last the successor to my stolen rally prepared Austin Cooper S, 277 BRX, has emerged from a 12 month rebuild of another Cooper S I bought in 2007. This car is a Morris Cooper S first registered in 1965 and converted into a 60’s rally replica, but not prepared to the current regulations for special stage rallying, and is now stored off-site for obvious security reasons.

Despite my knowledge of old minis...

Silverstone Classic Mini Touring - 08.05.10

From the beautiful setting and interesting and testing/demanding track that is Cadwell Park to the stark, tedious double drag strip, chain-link fenced edifice that is 'Stalag Silverstone'. Most definitely not a Mini-friendly circuit. The track is not very entertaining at all. Mostly two longish stretched of flat-out with two stops – one a hair pin (Becketts) and one a 'hurry up and wait' series of very, very slow corners that you have to literally trundle round.

03.04.10, Cadwell Park Race Report by Keith Calver

Getting the car ready for the first race was not quite the last minute flurry of panicked activity it usually is. Largely because the re-fit and re-furb were kept to a minimum following complete strip re-build plans shot to pieces by tradesmen being somewhat hard to pin down to get very necessary domestic work done.

Most importantly the doors and windows in the garage. The special concertina type front doors have been falling slowly decaying over the past few years....

Wolseley

When purchase secondhand DMP513A had a Taurus conversion which was a 28/36 down draught weber carb on a gas flowed head.998cc Colour originally blue I had it re-spayed 2 tone metallic using Rolls Royce colours...

Choice of radiators

Choice of radiators

Radiators Read about heat conductivity, core, fin design, tube sizes and design changes