Cylinder head - What can easily be achieved

During a discourse with the editorial staff at Mini Mag, it was decided the build feature presented an ideal opportunity to demonstrate just exactly what such an engine build is capable of in days where it's generally believed you have to have an all-singing, all-dancing 1380cc engine to have an enjoyable road burner - leaving those with very limited budgets a little depressed. During a discourse with the editorial staff at Mini Mag, it was decided the build feature presented an ideal opportunity to demonstrate just exactly what such an engine build is capable of in days where it's generally believed you have to have an all-singing, all-dancing 1380cc engine to have an enjoyable road burner - leaving those with very limited budgets a little depressed. So the idea was to finish the engine off using a relatively 'mild' specification to maximise drivability. The camshaft used was the fantastically versatile Swiftune Racing SW5 profile that provides drive from nowhere up to 7,000rpm - d

Cylinder Head - Unleaded Fuel Use

The specter of 'unleaded fuel only' - instigated in UK on January 1st 1999 and seemingly from decades ago across the rest of the world - seems to be forcing more and more folk into frightened, panic orientated action. And Mini owners are featuring heavily in this. See bottom for useful part numbers. The situation not at all being helped by all sorts of conflicting information from 'leaned' sources, such as lead levels in humans has declined greatly since 1935 - despite the rapidly expanding ownership of petrol-burning vehicles. And benzene and toluene used in unleaded fuels are cancerous. Still, the powers that be are relentlessly forcing through the 'no heavy metals in fuel' bills, not being at all put off by such trivia. Not surprising bearing in mind the complete debacle on the catalytic converter front - the type decided on for world wide and universal use was developed and tested in California!

Cylinder Head - Unleaded Fuel Use

The specter of 'unleaded fuel only' - instigated in UK on January 1st 1999 and seemingly from decades ago across the rest of the world - seems to be forcing more and more folk into frightened, panic orientated action. And Mini owners are featuring heavily in this. See bottom for useful part numbers. The situation not at all being helped by all sorts of conflicting information from 'leaned' sources, such as lead levels in humans has declined greatly since 1935 - despite the rapidly expanding ownership of petrol-burning vehicles. And benzene and toluene used in unleaded fuels are cancerous. Still, the powers that be are relentlessly forcing through the 'no heavy metals in fuel' bills, not being at all put off by such trivia. Not surprising bearing in mind the complete debacle on the catalytic converter front - the type decided on for world wide and universal use was developed and tested in California!

Cylinder Heads - Valves, Shape, Material and Finish

For the very good and simple reason it minimised airflow obstruction by having the least amount of material in the way. Very plausible, and a design that many have stayed with to this day - surprising considering the magnitude of expertise housed in the more recognised A-series tuners. Probably something along the lines of 'if it ain't broke, don't fix it', or perhaps (and more likely?) 'Can't teach an old dog new tricks'.

However, as time and technology progressed, man's ever-inquisitive nature started to determine more exactly what and why - and airflow activity was not passed over. Not only 'how much' was being measured, but 'where and how' to further determine where improvements could be made. After all - it has long since been realised that the engine is essentially an air pump. The more you get in, the more you get out, so improving the air's tortuous route to the cylinder has to help.

Cylinder head - Suitability basics

Whatever else owners do to their Minis by way of interior/exterior modifications or none at all, a very large proportion desire and search for an increase in engine performance.

See bottom for useful part numbers.

Now this may not be super-sonic speed-inducing power, it could just as well be for maximum economy. In either case, it's the engines volumetric efficiency (VE) under scrutiny - it's ability to breath in as much correctly proportioned air/fuel mix as possible in any given situation. Although the induction/exhaust system plays an important part, there are effectively two major factors that dictate performance increases - the camshaft and cylinder head. The induction and exhaust elements (stage one kits, exhaust systems, etc.) and camshafts are covered in various other articles in my 'Corner'. So here we'll have a look at cylinder heads and dispel some of the myths and legends surrounding them.

Cylinder Head - Unleaded fuel use

The specter of 'unleaded fuel only' - instigated in UK on January 1st 1999 and seemingly from decades ago across the rest of the world - seems to be forcing more and more folk into frightened, panic orientated action. And Mini owners are featuring heavily in this.

Cylinder Head - Unleaded fuel use

The specter of 'unleaded fuel only' - instigated in UK on January 1st 1999 and seemingly from decades ago across the rest of the world - seems to be forcing more and more folk into frightened, panic orientated action. And Mini owners are featuring heavily in this.

Engine - 998 tuning, further options

Following on from the easily bolted on performance enhancing components out-lined in the stage one section, we need to consider where to go to get more power output.

Terminology:
MSC/MM - Mini Spares Centre/Mini Mania
BBU - Big Bore Unit (refers to all 1275cc-based units)
SBU - Small Bore Unit (refers to all sub-1275cc units, here the 998)
BHP - Brake Horse Power
CR - Compression Ratio

To improve engine out-put, you need to increase the engine's 'breathing' ability. The stage one kit deals with all the easily bolted-on external parts, and represents the best increase for investment. From here on in the power increases will cost commensurately more money. Power production of any engine, once the 'breathing apparatus' (induction/exhaust system) has been dealt with to cause no restriction ...

Valve guides - Materials and usage

Material choices for guides are down to two distinct types - cast iron and bronze. Yes, cast iron. NOT steel as described in many adverts and by vendors.

Never have been, never will be. These are as fitted to the various A-series cylinder heads as standard in all applications. Cast iron is used because it is a very dissimilar metal from any used in valve manufacture - important to eliminate galling that causes seizure of the valves in the guides - is softer, yet resilient enough to wear well. Bronze, on the other hand, is a very general description as there are a variety of 'bronzes' used by various folk. In days gone by, the bronze base type used was 'PB1' (also known as 'Navy Bronze') - a phosphor-bronze alloy that was very orange in colour, and very soft, used primarily in race engines.

C-AHT88 STAGE THREE SPEC SMALL BORE CYLINDER HEAD

Modified to give maximum performance gain for cost.

Exhaust seats Latest spec inserts for lead free fuel Modified to give maximum performance gain for cost. Combustion chambers, inlet and exhaust ports extensively reworked. Stone-ground finish in ports promotes ultimate fuel atomisation.