Some Safari browsers are failing to connect secured pages Try the following: - refresh the page a few time to see if the page loads, if this fails please update the browser or try to browse the page in Firefox or Chrome. - Read more.
Minispares.com uses cookies to give a better browsing experience. Read more 
C-22A1741

COMPETITION STEEL BAULK RING

Mini Spares Performance Baulk ring.

The standard sintered baulk (synchro) rings are not tough enough for the demands of performance useage, in many instances lasting only one race before failure or breakage. The main reason is the incompatibility of the material specification with the usage, basically, it is too brittle. Our current competition baulk ring is cnc part machined then heat treated and then grooved for accuracy and concentricity in a certain grade of metal. This provides an exceptionally strong ring similar to those produced by Leyland in the 60s. Looks the same as standard apart from a corrected area of induction hardening around lugs and the 6 oil slots are rounded rather than square but performs better on moly coated gears such as all original Rover or Minispares evolution gears. The old bronze type was for non moly coated gears which some gear makers were supplying but is now obsolete. These are also manufactured to sit at the correct height on gears unlike most others now available including genuine which can cause gearbox's locking up on assembly. A new aBaulk ring should ideally sit at about 45 thou above gear with 40-60 being the usual range. anything below 30 thou and the gear should be examined for replacement.

Most of the racers using these baulk rings have found they last longer than any other available and because of the exact machining tolerances reduce the amount of sludge usually found in a gearbox as they wear.
  • £35.36 exc vat
  • £42.43 inc vat

 In stock

 
help Recommended usage 4 x C-22A1741 to fit one mini.
See details below of where C-22A1741 is used in AKM manual.
 
Gears - Qty 4

 
  • share
 

Recommended products

Showing 1 to 0 of 0 products
GEARBOX GASKET SET(GUG708010TS)
AJM804B   More Details
£8.88
(inc VAT) £10.66

 

Alternative products

Showing 1 to 0 of 0 products
BAULK RING TO ORIGINAL ROVER SPEC PRE 2000
22G2033EVO   More Details
£13.23
(inc VAT) £15.88

Manuals with this product

Showing 1 to 1 of 1 manual pages
 
 
 
Gears

Gearbox & Gear Train

Classic Mechanical Parts Manual
 

Kits containing this product

Showing 1 to 0 of 0 products
GEARBOX 5 SPEED A PLUS GEARS WITH 3.4 FINAL D......
MSG04   More Details
£3,342.65
(inc VAT) £4,011.18

REBUILD KIT 4 SYNC EARLY A+ AND ST S/CUT GEAR......
MSG24   More Details
£321.74
(inc VAT) £386.09

GEARBOX 5 SPEED HELICAL WITH X PIN DIFF ( + S......
MSG05   More Details
£3,348.57
(inc VAT) £4,018.28

5 SPEED CLOSE RATIO HELICAL GEARBOX WITH X PI......
MSG03   More Details
£3,627.23
(inc VAT) £4,352.68

GEARBOX 5 SPEED HELICAL WITH X PIN DIFF ( + S......
MSG05-32   More Details
£3,321.57
(inc VAT) £3,985.88

GEARBOX 5 SPEED A PLUS GEARS WITH 3.2 FINAL D......
MSG04-32   More Details
£3,302.18
(inc VAT) £3,962.62

GEARBOX REBUILT A+ STRAIGHT CUT WITH 3.1FD & ......
MSG40   More Details
£1,150.00
(inc VAT) £1,380.00

GEARBOX REBUILT A+ STRAIGHT CUT WITH 3.44FD &......
MSG42   More Details
£1,333.68
(inc VAT) £1,600.42

GEARBOX 5 SPEED HELICAL WITH X PIN DIFF ( + S......
MSG05-31   More Details
£3,321.57
(inc VAT) £3,985.88

GEARBOX REBUILT A+ STRAIGHT CUT WITH 3.2FD & ......
MSG41   More Details
£1,333.68
(inc VAT) £1,600.42

GEARBOX 5 SPEED A PLUS GEARS WITH 3.1 FINAL D......
MSG04-31   More Details
£3,302.18
(inc VAT) £3,962.62

GEARBOX 5 SPEED A PLUS GEARS WITH 3.4 AND ATB......
MSG04-ATB   More Details
£3,886.34
(inc VAT) £4,663.61

5 SPEED CLOSE RATIO HELICAL GEARBOX WITH ATB ......
MSG03-32ATB   More Details
£4,052.58
(inc VAT) £4,863.10

5 SPEED CLOSE RATIO HELICAL GEARBOX WITH X PI......
MSG03-32   More Details
£3,528.44
(inc VAT) £4,234.13

5 SPEED CLOSE RATIO HELICAL GEARBOX WITH ATB ......
MSG03-31ATB   More Details
£4,052.58
(inc VAT) £4,863.10

5 SPEED CLOSE RATIO HELICAL GEARBOX WITH X PI......
MSG03-31   More Details
£3,627.75
(inc VAT) £4,353.30

5 SPEED CLOSE RATIO HELICAL GEARBOX WITH ATB ......
MSG03-ATB   More Details
£4,027.08
(inc VAT) £4,832.50

5 SPEED CLOSE RATIO HELICAL GEARBOX WITH X PI......
MSG03-36   More Details
£3,528.44
(inc VAT) £4,234.13

5 SPEED CLOSE RATIO HELICAL GEARBOX WITH ATB ......
MSG03-39ATB   More Details
£4,057.08
(inc VAT) £4,868.50

 

People also bought

Showing 1 to 0 of 0 products
3 SYNCHRO 1ST MOTION BEARING
22G314   More Details
£10.00
(inc VAT) £12.00

NEEDLE ROLLER 1ST MOTION / LAYSHAFT 4 SYNC
13H9513INA   More Details
£15.63
(inc VAT) £18.76

PRIMARY GEAR BACKING RING GENUINE
88G549GENUINE   More Details
£13.00
(inc VAT) £15.60

DIFF HOUSING LOCK TAB ROD CHANGE LH
42H500   More Details
£0.91
(inc VAT) £1.09

DIFF HOUSING LOCK TAB ROD CHANGE RH
22A692   More Details
£1.35
(inc VAT) £1.62

GEARBOX LOCKTAB FOR 3 BOLT MAIN BEARING HOUSI......
DAM6047   More Details
£0.99
(inc VAT) £1.19

GEAR LEVER BUSH FLANGE
22G292   More Details
£5.63
(inc VAT) £6.76

LAYSHAFT A PLUS PERFORMANCE
C-22A1739   More Details
£31.85
(inc VAT) £38.22

3 SYNC 1st MOTION SINGLE ROLLER
2A3709   More Details
£135.00
(inc VAT) £162.00

THRUST WASHER LATE LAYGEAR .127-129"
DAM3182   More Details
£10.25
(inc VAT) £12.30

SPEEDO DRIVE HOUSING COVER BOLT
DAM7761   More Details
£2.08
(inc VAT) £2.50

MAINSHAFT NUT UNF
22G48   More Details
£6.99
(inc VAT) £8.39

BEARING FOR IDLER GEAR CONVERSION ROLLER A+ ......
DAM3745   More Details
£15.50
(inc VAT) £18.60

IDLER GEAR SHIM 134/.135" (YELLOW)
DAM4823   More Details
£16.80
(inc VAT) £20.16

PINION "C" SHIM .004"
GUG705646GM   More Details
£0.79
(inc VAT) £0.95

IDLER GEAR SHIM .136/.137" (RED)
DAM4824   More Details
£16.80
(inc VAT) £20.16

IDLER GEAR SHIM .136/7" BLUE
22A1548   More Details
£13.50
(inc VAT) £16.20

SINGLE ROW RHP ROLLER. 4 SYNCHRO
ADU7619   More Details
£34.97
(inc VAT) £41.96

DAM6624 PLANET GEAR WITH METAL BUSH FITTED
DAM6624BUSHED   More Details
£25.13
(inc VAT) £30.16

REBUILD KIT 4 SYNC EARLY A+ AND ST S/CUT GEAR......
MSG24   More Details
£321.74
(inc VAT) £386.09

Fitting instructions / Articles

C-22A1741 - COMPETITION BAULK RING – Fitting Instructions


Manufactured from high-tensile manganese-bronze, these baulk rings were developed for competition use where the standard sintered metal baulk rings have proven far from adequate. This material is not to be confused with the brass/silicone- brass materials, all-over-machined, experimented unsuccessfully with by others in the late eighties/early nineties. It is a purpose-sourced material, precision cast and finished-machined using the very latest technology....

C-22A1741 STEEL BAULK RING


C-22A1741 steel baulk rings are direct replacement for the sintered type, which have been used for all standard production uses for the last few decades.

Under competition use the sintered type could either break through being to brittle and of limited metal integrity or simply wear out quickly. Minispares looked at the old pre 1970 steel type baulk rings used so successfully on the Monte Carlo and rally cars of that time where...