Standard Product View

Standard Product View

Rear Radius Arm and Bearings

Standard Product View

Standard Product View
  • Label
    Part Name
    Part No.
  • 1
    Radius arm bushed assembly R/H less No.5
    NAM7162
  • 1
    Radius arm bushed assembly R/H with No.5 repair kit
    NAM7162KIT
  • 1
    Reconditioned radius arm R/H with kit No.5 fitted
    TRA33
  • 1
    Radius arm bushed assembly L/H less No.5
    NAM7163
  • 1
    Radius arm bushed assembly L/H with No.5 repair kit
    NAM7163KIT
  • 1
    Reconditioned radius arm L/H with kit No.5 fitted
    TRA32
  • 2
    21A397
  • 3
    Stub axle shaft R/H
    2A7351
  • 3
    Stub axle shaft L/H
    2A7364
  • 4
    Circlip for stub axle
    2A7352
  • 5
    Radius arm repair kit (single arm only)
    GSV1125
  • 7
    Rubber sealing ring
    2A7327
  • 8
    Outer thrust washer
    2A7324
  • 9
    Inner thrust washer
    ACA9302
  • 10
    Bronze bush outer
    2A7325
  • 11
    Plain nut 1/2” UNF
    GFK3215
  • 12
    Grease nipple straight, was UHN400
    LN10051
  • 13
    Hub rear less wheel studs
    RLH10021
  • 14
    Wheel stud, 55mm stud shaft length with 20mm thread
    21A1278
  • 14
    Wheel stud, 58mm stud shaft length with 19mm thread
    ENJO-1039
  • 14
    Wheel stud, 78mm stud shaft length with 27mm thread
    ENJO-1040
  • 15
    Wheel nut, with 60 degree seat angle for steel wheels
    113087
  • 15
    Wheel Chrome nut, with 60 degree seat angle
    CN5
  • 15
    Wheel nut, for alloy wheels less stainless steel cover
    AJM1139
  • 15
    Wheel nut, for alloy wheels with stainless steel cover
    NAM9075
  • 16
    Rear hub tapered upgraded bearing kit with O ring [link]CDU1173[/link]
    GHK1805
  • 17
    Oil seal
    GHS102
  • 18
    Split pin for stub axle shaft/nut
    GHF511
  • 19
    ‘O’ ring for stub axle inner. Fitted from 1996 only
    CDU1173
  • 20
    Washer for rear hub nut
    BTA672
  • 21
    Castle nut R/H with right hand thread
    NL610041
  • 22
    Castle nut L/H with left handed thread
    FNN2410
  • 23
    Grease retaining cap
    ATB4098
  • 24
    Spacer for rear wheel 1/8” (5mm) without studs
    SR4
  • 24
    Spacer for rear wheel 3/16” (3mm) without studs
    SR3
  • 24
    Spacer kit for rear wheel 3/4” (19mm) with studs
    CW17

Safety Critical Notice: When fitting wheel spacers ensure they are the correct specification for your vehicle not causing undue loading on any components.

Note: No16. GHK1805  had improved tapper bearing rollers for use on 13” wheels as a Rover warranty bulletin upgrade with an ‘O’ ring for the stud shaft to prevent water penetration. Radius arms were machined with a recess for the 'O' ring from 1996 on.