4 Synchro Gears Up to 1979 with 14MM Nose Mainsha

  • Label
    Part Name
    Part No.
  • 1
    Gear idler, 31 teeth shaft diameter .750” (19.05mm)
    22G943
  • 2
    Thrust washer idler gear .130”-.131” (3.30-3.32mm)
    22A1545
  • 2
    Thrust washer idler gear .132”-.133” (3.35-3.37mm)
    22A1546
  • 2
    Thrust washer idler gear .134”-.135” (3.40-3.42mm)
    22A1547
  • 2
    Thrust washer idler gear .136”-137” (3.45-3.47mm)
    22A1548
  • 2
    Thrust washer idler gear .138”-139” (3.50-3.53mm)
    22A1549
  • 3
    1st motion shaft 17 teeth
    22G1093
  • 3
    1st motion shaft 18 teeth
    22G1371
  • 4
    Roller needle bearing
    CHM172
  • 5
    1st motion ball bearing
    ADU7619
  • 6
    Circlip bearing
    22G850
  • 7
    1st motion gear shaft drive 24 teeth
    22G849
  • 8
    Washer locktab
    DAM4000
  • 9
    Nut
    2A3548
  • 10
    Layshaft
    22G931
  • 11
    Laygear 15.20, 25.29 teeth
    22G927
  • 11
    Laygear 15.20, 25.29, smaller diameter 29 teeth area
    22G1040
  • 12
    Needle roller bearing
    88G396
  • 13
    Needle roller bearing, was 22G855
    CHM141
  • 14
    Thrust washer laygear .123”-.124” (3.12-3.14mm)
    22G856
  • 15
    Thrust washer laygear, large
    22G860
  • 17
    Bush (single one piece bush) was 22G825
    TUJ10001
  • 18
    Reverse idler gear shaft
    DAM8038
  • 19
    3rd motion shaft with small end nose .550” (13.97mm)
    22G833
  • 21
    3rd and 4th synchronizer hub
    DAM7456
  • 22
    Ball for synchronizer hub (3 per hub)
    BLS107
  • 23
    Spring for synchronizer hub (3 per hub)
    22G2262
  • 25
    3rd gear roller needle bearing was 88G496
    AAU1816
  • 26
    Thrust washer for 3rd gear
    22G947
  • 28
    Spring
    22G154
  • 29
    2nd speed gear 26 teeth
    22G1094
  • 30
    Roller needle bearing was 88G495
    AAU1816
  • 31
    Thrust washer
    22G839
  • 32
    1st and 2nd synchronizer hub was 22G2263
    DAM7455
  • 33
    1st speed gear 31 teeth
    22G1096
  • 34
    Roller needle bearing was 88G494
    AAU1815
  • 36
    3rd motion shaft ball bearing
    AAU1365
  • 37
    Spring ring, was 22G72
    ADU4992
  • 39
    Locating plate
    2A3581
  • 41
    Locktab washer
    DAM2377
  • 42
    Retainer screw, UNC 5/16”x 3/4” long - Was 7/8” long
    SH505061
  • 43
    Final drive pinion 17 teeth 3.76:1 ratio
    22A399
  • 43
    Final drive pinion 18 teeth 3.44:1 ratio
    22A413
  • 44
    Locktab washer
    DAM6140
  • 45
    Retaining pinion nut
    22G48