CYLINDER HEAD 8 PORT ARDEN LARGE VALVE 2012
Out of stock
Alloy 8 Port Head with 37.mm inlet valves with springs/top caps built up to take .500 thou cam lift with approximately 21cc combustion chamber. The valve springs used are C-AEA526 with a fitted length of 1.350" for the most radical of race cams C-AEA527 may be used with a fitted length of 1.440" This is the cylinder head only and not a straight bolt on part so see description for C-AJJ4064 kit. All heads are hipped and heat treated from the foundry and pressure tested before machining and again after they are assembled. Special camshaft and modification to No 2 &4 S con rods is required, or special rods C-AEG624 are available using different bolt configuration. Original design and tooling from Jim Whitehouse-the founder of Arden Conversions this head with tecalemet injection won class and series outright,in the 1969 British saloon car championship on a 970cc Cooper S. 37mm inlet and 30.5mm exhaust valves Head Gasket GEG300,BK450 or C-AHT189 cometic/or multi steel layer type must be used
£2,959.21
£2,466.01