VALVE EXHAUST LONG STEM 31mm. heat treated for unleaded use

1.220" (31mm) dia x 3.57 exhaust valve. Our race valves are produced in EN214N steel and are stellite tipped and use the later narrow, single collet groove and current valve head shapes.These valves are plasma heat treated to eradicate wear from unleaded petrol and can be used with our 12G1963 or C-AJJ4037 guides. As it is possible, even common, to swap one head for another on 1275 engines, it is quite easy to become confused,it may have oversize valves; it may have undersize if seats have been installed. Unless you are 100% sure what is in your cylinder head, it is a good idea to remove a valve for accurate measurement. There are two lengths used (nominally 3.52" & 3.57") three different keepers, (wide, narrow, and three-groove) and many different head diameters! Note that 12G1316 (Smog-Type), all variations of the 12G940, and the latest CAM head castings all use the following 3.57" long valves.