- Mini Spares

Posts in Body

Sportspack Fitting Template

February 6, 2025 1:55 pm
By - Leave your thoughts

These downloadable templates can be printed out to scale to help you fit the Sportspack for: – MS135 – WHEEL ARCH SET OF 4 GENUINE SPORTSPACK ARCHES A4 printable PDF below Large printable PDF below

Interior lamps made by Mini Spares

April 21, 2023 11:27 am
By - Leave your thoughts

These are the two early interior lamps we have remanufactured. Either early type Pointed ends or Blunt ends for any Pre October 1974 models. 14A9148 with the pointed ends and black switch was fitted to Mk1 Mini to Oct 1964 and Elf/Hornet MK2 1965. Lamp body length is 13.6cm(5.35″) by 3.40cm(1.34″) body width and listed […]

24A2158 & 24A152 GRILLE Morris Cooper & S Mk1

February 27, 2023 3:05 pm
By - Leave your thoughts

24A2158CHROME the chrome version was first used on the 1961 Morris Cooper and then on the Cooper S 1070 from 1963, then 970/1275 until about 1965 when the stainless steel version 24A2158 was fitted as an alternative material for longevity, both having the lower grille bar extrusion with pointed ends. 24A2159 is a stainless steel […]

Old Historic parts suppliers

October 14, 2022 6:10 pm
By - Leave your thoughts

HISTORIC SUPPLIER PIANOFORTE & PRICES- By 1981 the ALA6668 Cooper S Mk2 grille had become NLA from Leyland under the ten year stocking rule and the aftermarket product was very poor quality so I approached Pianoforte the original suppliers who offered to reintroduce the grille solely for us in Feb 1981 with a tooling renovation […]

Internal Bonnet Release Kit

December 31, 2020 5:28 pm
By - Leave your thoughts

GS130273 Internal Bonnet Release KitThe cable bracket is made to fit universally and will replace the original bracket as tacked in on the latest Minis.The funny looking tag, which points to the heater, is used on later cars to hold a relay and the single bolthole faces the front. This bracket should be fitted about 3″ […]

1 2