DISTRIBUTOR SHIELD COVER FOR ELECTRICS LATEST TYPE

The current genuine large plastic shield with all fittings required to cover the engine electrics. Parts are available seperately: The plastic clips are 13H6461. Upper bracket is NJU10002 x 2 required. Lower bracket is JZV1073. NJT10004 for plastic cover only. The 2 upper brackets fit on the rocker cover retaining nuts and the lower bracket fits on the gearbox with the square fastener hole towards the oil filter side. You will have to remove the gearbox to engine bolts. Start with the middle bolt first (there are 5 bolts) so you can see where the bracket needs to fit and the bolt to the left, nearer to the starter is the other bolt needed to remove.