VALVE SPRING SEAT SHIMS 0.056" (set of 4)

Cylinder head - What can easily be achieved

During a discourse with the editorial staff at Mini Mag, it was decided the build feature presented an ideal opportunity to demonstrate just exactly what such an engine build is capable of in days where it's generally believed you have to have an all-singing, all-dancing 1380cc engine to have an enjoyable road burner - leaving those with very limited budgets a little depressed. During a discourse with the editorial staff at Mini Mag, it was decided the build feature presented an ideal opportunity to demonstrate just exactly what such an engine build is capable of in days where it's generally believed you have to have an all-singing, all-dancing 1380cc engine to have an enjoyable road burner - leaving those with very limited budgets a little depressed. So the idea was to finish the engine off using a relatively 'mild' specification to maximise drivability. The camshaft used was the fantastically versatile Swiftune Racing SW5 profile that provides drive from nowhere up to 7,000rpm - depending on the finished spec - with minimal hydrocarbons for emissions testing.

C-AEA527 Dual Valve Springs Fittting Instructions

This valve spring set has been developed to fit standard sized top caps, and cope with racing rpm, savage cam lobe opening rates and high valve lifts up to 0.520”. Most cylinder heads when modified for racing culminate in a fitted valve spring height of around 1.420” to 1.440”.

C-AEA527 DUAL VALVE SPRINGS FITTING INSTRUCTIONS

See bottom for useful part numbers.

However where possible, it is always advantageous to correct and match the valve spring heights (measured from the spring seat in the head to the underside of the spring retainer cap), as these will vary particularly where new valve seats are cut and the standard valve spring seats are left – some by as much as 0.050”!

C-AEA526 DUAL VALVE SPRING FITTING INSTRUCTIONS.

This valve spring set has been developed to fit standard sized top caps, and cope with fast road/rally rpm and high valve lifts, without crushing, of up to 0.495” without modifications when fitted to a cylinder head that has standard or near standard valve spring heights. However, where possible, it is always advantageous to correct and match the valve spring heights (measured from the spring seat in the head to the underside of the spring retainer cap), as these will vary particularly where new valve seats are cut.