Some Safari browsers are failing to connect secured pages Try the following: - refresh the page a few time to see if the page loads, if this fails please update the browser or try to browse the page in Firefox or Chrome. - Read more.
Minispares.com uses cookies to give a better browsing experience. Read more 
C-STR632

FAST ROAD LOWER ARM BUSH SET

Mini Spares product UK made especially for use when geometry has been changed, such as fitting adjustable tie rods or lower arms, or on any cars with corrected castor angles.

Set of 4 bushes.

These metal sleeved bushes are specially angled to compensate for the newly formed angles of your car geometry when the car is set up properly. These bushes were under development for 2 years and introduced in Nov 2003 because the poly type and previous rubber type were not man enough to give a decent longevity when correct geometry settings are set up. Bushes need the ability to flex when castor/camber angles are changed and therefore these are good upto 3.5 degrees of castor angle or any standard car that ruins other bushes. Although more expensive than poly or standard type these offset type will last much longer as proven by customers feed back.

See C-STR631 if you are tarmac racing and require a harder compound.

See Dodds diary article about poly bushes.
  • £10.91 exc vat
  • £13.09 inc vat

 In stock

 
help Recommended usage 1 x C-STR632 to fit one mini.
See details below of where C-STR632 is used in AKM manual.
 
Front Hydrolastic Displacer Suspension ( Known as - Qty 1

Front Rubber Cone Spring Suspension ( Known as Dr - Qty 1

Front Suspension - Qty 1

 
  • share
 

Recommended products

Showing 1 to 0 of 0 products
GENUINE LOWER ARM SUSPENSION PIN
2A4362   More Details


Was £18.45
(inc VAT) £22.14

NUT NYLOC 3/8" UNF
GFK3323   More Details
£0.12
(inc VAT) £0.14

SPRING WASHER 3/8X11/16
GHF333   More Details
£0.04
(inc VAT) £0.05

 

Alternative products

Showing 1 to 0 of 0 products
LOWER ARM BUSH SET RACE GRADE WITH CORRECTED ......
C-STR631   More Details
£11.00
(inc VAT) £13.20

LOWER ARM BUSH UPGRADE BLACK POLY TYPE
21A1882MS   More Details


Was £1.35
(inc VAT) £1.62

Manuals with this product

Showing 1 to 3 of 3 manual pages
 
 
 
Front Rubber Cone Spring Suspension ( Known as Dr

Front & Rear Suspension

Classic Mechanical Parts Manual
Front Hydrolastic Displacer Suspension ( Known as

Front & Rear Suspension

Classic Mechanical Parts Manual
Front Suspension

Driveshafts Suspension & Wheels

Classic Mechanical Parts Manual
 

Kits containing this product

Showing 1 to 0 of 0 products
CAMBER TRACKING KIT OF 21A1091 AND C-AJJ3360 ......
MSSK3008   More Details
£78.03
(inc VAT) £93.64

SUSPENSION PACKAGE OF AGX DAMPERS PLUS GEOMET......
MSSK3012   More Details
£393.62
(inc VAT) £472.34

SUSPENSION PACK OF GEOMETRY ITEMS FRONT AND R......
MSSK3013   More Details
£108.98
(inc VAT) £130.78

SUSPENSION GEOMETRY FRONT KIT WITH MS70 AND C......
MSSK3014   More Details
£113.66
(inc VAT) £136.39

SUSPENSION PACKAGE WITH GEOMETRY PARTS PLUS C......
MSSK3012A   More Details
£374.88
(inc VAT) £449.86

 

People also bought

Showing 1 to 0 of 0 products
DAMPER BILSTEIN B4 GAS FRONT
19-221694   More Details


Was £17.99
(inc VAT) £21.59

BALL JOINT EXTRA SHIM KIT (6 SHIMS)
2A4242   More Details
£1.90
(inc VAT) £2.28

TIE BAR BUSH - HARD RUBBER SINGLE BUSH ONLY
C-STR628   More Details
£0.80
(inc VAT) £0.96

SUSPENSION ADJUSTABLE RIDE HEIGHT CONES PLUS ......
C-STR644A   More Details
£57.93
(inc VAT) £69.52

SUBFRAME TOWER IMPROVEMENT KIT FOR FRONT SUBF......
C-STR640A   More Details
£15.00
(inc VAT) £18.00

LOWER ARM SPERICAL JOINTS PLUS COVERS AND SPA......
C-AJJ3360B   More Details
£35.58
(inc VAT) £42.70

LOWER ARMS ON CAR ADJUSTABLE WITH SPHERICAL J......
C-AJJ3360A   More Details
£82.08
(inc VAT) £98.50

DAMPER GAS TWIN TUBE ADJUSTABLE FRONT AGX EVO......
743039   More Details
£52.77
(inc VAT) £63.32

ROAD RALLY RUBBER CONE SPRING - RED SPOT
C-STR687   More Details
£48.10
(inc VAT) £57.72

NEGATIVE CAMBER LOWER ARMS +030"
C-AJJ3364A   More Details
£46.00
(inc VAT) £55.20

GREASE NIPPLE TOP ARM (45°)
UHN445   More Details


Was £0.85
(inc VAT) £1.02

DAMPER KONI SPORT FRONT STD RIDE HEIGHT ADJUS......
C-STR1675SPORT   More Details
£69.23
(inc VAT) £83.08

LOWER ARM BUSH UPGRADE BLACK POLY TYPE
21A1882MS   More Details


Was £1.35
(inc VAT) £1.62

SWIVEL PIN BALLJOINT SHIM 003"(.076MM)
2A4239   More Details
£0.32
(inc VAT) £0.38

LOWER ARM BUSH SET RACE GRADE WITH CORRECTED ......
C-STR631   More Details
£11.00
(inc VAT) £13.20

DAMPER KONI FRONT STANDARD HEIGHT SUSPENSION
C-STR1675   More Details
£63.38
(inc VAT) £76.06

SHOCK ABSORBER TOP FRONT BRACKET R/H
21A471   More Details
£18.38
(inc VAT) £22.06

COMPETITION RUBBER CONE SPRING - YELLOW SPOT
C-STR688   More Details
£50.50
(inc VAT) £60.60

TIE BAR BUSH KIT FOR ROAD/RALLY RACE (4 BUSHE......
C-STR627   More Details


Was £3.50
(inc VAT) £4.20

LOWER ARM BUSH PRE '66 NON TAPERED HOLE TYPE
2A4294   More Details
£1.10
(inc VAT) £1.32

Fitting instructions / Articles

SUSPENSION GEOMETRY - Buy the right parts to do the job correctly


It is baffling to see so many companies advertising mini suspension geometry parts in kits that are a waste of time as they rarely complete the job on either the front or the rear.

C-STR631 & 632 Offset bottom arm bushes


Aftermarket bushes for suspension and subframes have been a topic of conversation for some time now. Many folk have become obsessed about fitting brightly coloured plastic (polyurethane) bushes in place of any rubber bush they can find in the belief they will improve the performance of whatever bush has been replaced. Whilst it is true that polyurethane is harder wearing - and therefore longer lasting - than rubber in many applications it is not necessarily the best material for the application every time. Polyurethane has greater abrasion resistance and is stiffer for a similar hardness, is much cheaper to produce (and therefore sells at lower cost) and can be produced in a wide variety of gaudy colours.