Title

competitions

Windscreen Washer

Label	Part No	Description	Quantity	Comments
1	GWW918	Washer bottle round with 2” (51mm) cap - Tudor type	1	MK1/2 Mini and MG range
1	17H2536	Washer bottle round with 13/8” (35mm) cap - Winguard type	1	Original fitting MK1/2
2	37H9712ORIGINAL	Bracket for bottle MK1/2	1	Original fitting MK1/2
3	37H9672	Wire clip for bottle	2	Original fitting MK1
4	24A1387	Clip for bottle (bicycle type)	1	Original fitting MK2
5	GFK1123	Spring washer	2
6	GFK3210	Nut 3/16”UNF	2
7	SE910201	Screw 3/16”UNF 3/4”long	2
8	37H9712	Bracket stainless steel for round bottle No.1	1	MK1/2 Mini and MG range
9	GWW916	Small 1/2 litre washer bottle, takes small cap GWW951 - C.W.E	1	1970-80 - use GWW906
10	GWW906	Large 1 litre washer bottle, takes [LINK]GWW951/[LINK] cap	1	1970-80
11	GWW907	1.7 litre washer bottle, takes GWW952 cap and GWW951 insert	1	1980 on
12	GWW935	Bottle and cap for integral electric pump 1982-88	1	Uses GWW1192 pump
13	CZH1624	Bracket for windscreen bottle - N.L.A	1	Use CZG1496
13	CZG1496	Bracket for windscreen bottle in boot 1991 on	1	Replaces CZH1624
14	GWW951	Cap for GWW916/GWW906 (fits in GWW952, cap for GWW907)	1
15	GWW952	Cap for GWW907 (GWW951 fits into centre hole)	1
16	GWW102	Manual washer pump to 1980	1
17	GWW125	Electric washer pump	1	1980 on
18	GWW1192	Electric integral washer pump, fits to GWW935 bottle	1	1982-88 was GWW130
19	GWW807	Jet, MK1/2, black	2
19	MS389	Jet, MK1/2, twin jet nut fit	2	Relieve bodywork
20	GWW810	Jet, Chrome, nut fit single jet MK1/2 - 1/8”bore	2	3.2mm ends
20	GWW801	Jet, Chrome, nut fit twin jet - 3/16”bore 4.8mm	2	Relieve bodywork hole
21	GWW804	Jet, MK3 fits round locating hole	2	1970-80
21	GWW1080	Jet, fits D shaped locating hole - was GWW842 / GWW829	2	1981 on
22	GWW504	Valve for use with GWW807 jet - MK1/2 - Winguard type	1
23	GWW506	Valve for use with [LINK]GWW804[LINK] jet - Tudor type	1	1970 on until GWW935 bottle
24	GWW401	T piece, (3/16”) 4.8mm ends for washer hose	1	Uses 4.8mm hose
24	GWW404	T piece, 2 small bore ends one large	1	2 x 3.2mm end & 1 x 4.8mm end
25	GWW408	T piece valve, was GWW407 - MK1/2/3	1	2 x 3.2mm end & 1 x 4.8mm end
26	GWW201M	Washer tubing 1/8” (3.2mm), small bore (per metre)	1	As required
26	GWW202M	Washer tubing 3/16”(4.8mm), large bore (per metre)	1	As required
27	BAU2043A	Grommet for pump mount in washer bottle	1
28	GWW975	Blue cap for GWW935 Bottle	1	Supplied with new GWW935

Previous | Next | Index

Note: Windscreen washer tubing was known as 1/4" bore. Now the metric equivalent is 3/16" 4.8mm bore, but known as 5mm.

This is the largest size used and fits correctly.

	Reconditioned	Road/Rally	Race Quality Valves
998cc	GCG1007MS		C-AHT88
1275cc pre 1992	GCG1009MS	C-AHT135	MSE3 / MSE8
1275 cc 1992 on	GCG1009METRO	MSE6	MSE4
MPI (Twin Point)	GCG1009	C-AHT136	MSE7

Previous | Next | Index

Contact Mini Spares

Store Details:

Classic Mini Brochure & Manuals

Mini Spares Online Documents