Mini Spares - Product - FAM7307 - STEERING RACK LHD NEW UNIT (GSR158)

Join Mini Spares Today.

Click to see details for advantages of joining us

Extended Navigation

Cliking on this button will extend the treeview
to 3 levels with many subcategories

Buy Vouchers

Fast Part Entry

GEARBOX ROD CHANGE ...

was	now
£4.08	£3.87	exc vat
£4.79	£4.55	inc vat

STEERING RACK LHD NEW UNIT (GSR158)

FAM7307

Description

Brand new rack for Mk2 on Left Hand drive cars less track rod end joints,with no neccessity for old rack in exchange.On most of these racks one of the small bolts that holds the pinion cover on sticks out. do not be tempted to tighten it up as it will adjust the preload on the rack. the more you tighten it, the stiffer the rack will get! (and vica-versa) Always replace the dust shield 21A30 between body and rack around the spindle that locates the inner column and anti friction/static packing pieces 21A2553. Always replace the dust shield 21A30 between body and rack around the spindle that locates the inner column and anti friction/static packing pieces 21A2553. Not suitable for Sportspack MPI cars.

£49.36 exc vat
£58.00 inc vat

People who bought the above item also bought following items.

HEAD GASKET SET 850/997/9... AJM1250MS
	Special universal head kit includes head gasket, valve cover gasket, manifold gasket, thermostat gas...
	£7.13exc vat £8.38inc vat

VACUUM PIPE- INLET MANIFO... MLH10022
	There are 2 vacuum pipes on the single point injection car. This one MLH10022 which has angled ends...
	£2.96exc vat £3.48inc vat

EXHAUST MANIFOLD CLAMP ST... GEX7046
	Exhaust manifold to downpipe clamp. The key to eliminating exhaust leaks at the manifold flange is ...
	£3.00exc vat £3.53inc vat

BRAKE MASTER METAL BODY O... GMC171ORIGINAL
	original Lockheed metal body master cylinder available since Oct 2003 Ensure the correct ...
	£55.85exc vat £65.62inc vat

1300 MAINS A PLUS VP91886-10
	lead indium bearing and is considered the best type available for race engines but most road can wil...
	£27.00exc vat £31.73inc vat

GEAR LEVER BUSH 22G389
	The plastic bush at the base of the gear lever stalk ON REMOTE TYPE GEARBOXES ONLY--stops that rattl...
	£2.50exc vat £2.94inc vat

BOOT SEAL CLIP KIT 14A6585KIT
	Used on all MK1/2/3 bootlids there are 26 little holes drilled around the inner edge to hold the sea...
	£7.75exc vat £9.11inc vat

STABILISER BUSH ONE PIECE... KKF101320EVO
	The last Rover update on the upper engine stabiliser bar,but this is upgraded for performance use. ...
	£3.60exc vat £4.23inc vat

RADIATOR SURROUND RUBBER 14A7286
	Original one piece rubber surround rubber for MK1/2 and early MK3 pre 1975 minis. This rubber attach...
	£5.25exc vat £6.17inc vat

GRILLE SURROUND MOULDING ... GRILLE10
	Grille surround set-Bonnet moulding and 2 side pieces plus chrome plastic seating strips and screws ...
	£29.00exc vat £34.08inc vat

SWITCH FOR COURTESY LIGHT... YUE100470
	Courtesy swith for MPI minis from 1996 when the wiring was changed from bullet type to spade connect...
	£3.00exc vat £3.53inc vat

BIG ENDS PLUS 30 OVERSIZE... AEB572-30
	Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long ...
	£21.53exc vat £25.30inc vat

DOOR DOVETAIL SCREW MK1/2... CMZ212
	SPECIAL 6/32" UNC COUNTERSUNK POZI SCREW 3/4" total length for holding the white nylon door buffer 1...
	£0.23exc vat £0.27inc vat

DISTRIBUTOR CAP RETAINING... GDC136CLIP
	Replacement distributor cap retaining clip for all 45D type distributors
	£2.50exc vat £2.94inc vat

HEATER VALVE NON GENUINE-... ADU9102MS
	This heater valve looks similar to the genuine but has different cable connection and you will requi...
	£11.99exc vat £14.09inc vat