mini spares - cooper parts & accessoriesClassic miniNew mini
Home - RoverShop - CooperSale items - CooperArticles - RestorationClassic mini forumFitting instructions - RepairTechnical tipsAbout us

  
Cliking on this button will extend the treeview
to 3 levels with many subcategories

   Buy Vouchers


COIL SPRING CONVERSION SET (RED)FIRM RACE
C-SRP200

Description

It has been said that one of the biggest improvements that can be made to a Mini is to replace the rubber cone springs. When that statement was made it referred to new rubber cones… there is now a new standard in Mini springing: coil springs! This direct-replacement kit includes everything to replace the harsh riding rubber cones with proper springs. Special hard anodized aluminum perches allow the springs to be fitted to either the stock trumpets or Hi-Los. The highest quality progressive winding is used to insure that the springs will not sag after many years of use, unlike the rubber cones. Available in three spring rates: C-SRP100 is soft (Blue), C-SRP200 is firm (Red), and C-SRP250 competition spec.We do not recommended these for road use as the spring can dislodge when hitting holes in bad roads especially lowered cars.Suspension mods should be carried out by proffessionals as in racing..


£239.75 exc vat
£281.71 inc vat



People also bought
 People who bought the above item also bought following items.
BOOT HINGE GASKET LOWER
These gaskets should be changed when replacing the hinges-this one goes between the bootlid hinge on...

£0.34exc vat
£0.40inc vat

RADIUS ARM REPAIR KIT
Complete rebuild kit for rear swingarm. Includes shaft, bearings, bushes, thrust plates and seals. I...

£8.44exc vat
£9.92inc vat

OIL GAUGE PIPE BRAIDED 4'LONG
With this large diameter line to the oil pressure guage you can actually see minor fluctuations in t...

£10.99exc vat
£12.91inc vat

GREASE NIPPLE - TOP ARM (45°)
Angled grease nipple for the upper arm on the front suspension of all Minis importantly lubricates ...

£0.85exc vat
£1.00inc vat

WHEEL ARCH KIT MINI SPECIAL TYPE PLASTIC KIT (BLACK)
A full set of four arches and two side trims as fitted to all factory cars from 1984 on as standard ...

£16.00exc vat
£18.80inc vat

CARB HS2 SERVICE KIT FOR SU CSK51
Carb repair kit less spindle and dbutterfly for single HS2 1.25"carbs-includes float needle valve an...

£16.75exc vat
£19.68inc vat

PLASTIC NUT ON DOOR FIXINGS
Multi purpose square plastic plu/nut for No8 screw size was used on many door fixings and fuse box t...

£0.17exc vat
£0.20inc vat

HUB KIT REAR INC HUB SEAL-TIMKEN GENUINE
Original Timken Rear tapered roller wheel bearing kit, for one wheel. The Mini Cooper S was equipp...

£15.15exc vat
£17.80inc vat

GEARBOX STABILISER R/H KIT
Lower Stabilizer Kit, RH Designed as an almost mandatory addition to any Mini with a rod change tra...

£14.46exc vat
£16.99inc vat

BONNET LOCKING KIT CABLE TYPE
The safest way to have a bonnet lock is an internal release type, as fitted to all the late Minis FR...

£23.63exc vat
£27.77inc vat

SUSPENSION PACK OF GEOMETRY ITEMS FRONT AND REAR
Ultimate road or race geometry kit which includes following parts. Adjustable tie rods and lower arm...

£86.80exc vat
£101.99inc vat

MASTER CYLINDER GASKET EARLY TYPE
the gasket that sits wunder the plate which the brake and clutch master cylinders sit on---single br...

£2.55exc vat
£3.00inc vat

SUNVISOR MINI 1970 ON PLAIN BLACK
SUNVISOR MINI 1970 ON PLAIN BLACK

£20.35exc vat
£23.91inc vat



Select Currency
 Basket Dice 
 Login to view saved basket 
  
  
  
  
  
  
 Currency change 
   
New BMW Mini Parts Sale
Podcast Minispares
New Mini Challenge Gallery