mini spares - cooper parts & accessoriesClassic miniNew mini
Home - RoverShop - CooperSale items - CooperArticles - RestorationClassic mini forumFitting instructions - RepairTechnical tipsAbout us

  
Cliking on this button will extend the treeview
to 3 levels with many subcategories

   Buy Vouchers


MINISPARES MOLYBDENUM CROSS PIN DIFF
C-AJJ3385

Description

This is the original Evolution"Cross-pin" differential for the Mini. Produced by us over 10 years ago it is a super heavy duty differential designed as a significant upgrade for reliability and strength to the standard units. Only our design incorporates two specially molybdenum coated differential pins at a "cross" to each other with four planetary gears.(Standard diff has two) Twice as many as standard. Not only does it handle more power but the extra gears mean a much smoother performance and much less tendency for torque steer!Beware of copies which do not perform as well or last as long owing to an inferior design of pins and planet gears. These differentials can be used in all models of transmissions from the first 850s up to the current 1380's with 5-speed A+ gearboxes! If ever stripping down these units, always read instructions because although they rarely wear, breakage of the small half pin may occur if not dismantled correctly. PLEASE ENQUIRE FOR FITTING AND DISMANTLING INSTRUCTIONS IF YOU ARE NOT SURE.


£136.16 exc vat
£159.99 inc vat



People also boughtSome products contained in this kit are available individuallyRelated articlesFitting instructions
 People who bought the above item also bought following items.
OIL PRESSURE RELIEF BALL
The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access ...

£0.60exc vat
£0.71inc vat

CLUTCH OIL SEAL GENUINE GACO MINISPARES PERFORMANCE USE TYPE
Intoduced for competition engines where the increased rev limits or temperature can cause the LUF100...

£3.75exc vat
£4.41inc vat

GASKET FOR THERMOSTAT LATEST GENUINE TYPE
Genuine version of the thermostat gasket for all A series --Black one side and red the other they ar...

£1.00exc vat
£1.18inc vat

HANDBRAKE ADJUSTER NUT
specail shaped nut for handbrake cable at handbrake end

£2.90exc vat
£3.41inc vat

PUSH ROD 1275 AFTERMARKET MANUFACTURE
NON GENUINE for standard use only. These are the only type available at the moment and not as accura...

£2.30exc vat
£2.70inc vat

STABILISER BUSH ONE PIECE-PERFORMANCE USE-STD FROM 1996
The last Rover update on the upper engine stabiliser bar,but this is upgraded for performance use. ...

£3.60exc vat
£4.23inc vat

BY PASS HOSE IN BLUE SILICON
Long lasting silicon by pass hose between cylinder head and water pump. These are easy to cut and s...

£3.15exc vat
£3.70inc vat

GEARLEVER QUICKSHIFT GENUINE KAD LATEST TYPE FOR ROD CHANGE
The new improved KAD quickshift is a redesign of the original KAD stick incorporating many detail ch...

£75.96exc vat
£89.25inc vat

SCREW AIR FILTER TO THROTTLE BODY ALL INJECTION MODELS
These were special screws which should be changed when used as they have a securing area on them to ...

£0.29exc vat
£0.34inc vat

RADIATOR SURROUND RUBBER
Original one piece rubber surround rubber for MK1/2 and early MK3 pre 1975 minis. This rubber attach...

£5.25exc vat
£6.17inc vat

GRILLE SURROUND MOULDING SET WITH PLASTIC SEATINGS MK2 ON
Grille surround set-Bonnet moulding and 2 side pieces plus chrome plastic seating strips and screws ...

£29.00exc vat
£34.08inc vat

CLUTCH RELEASE BEARING-HEAVY DUTY PRE VERTO
This is the original heavy duty clutch throw out bearing, A direct replacement for the early type t...

£19.45exc vat
£22.85inc vat

CAM FOLLOWER ORIGINAL AE HEPOLITE(FEDERAL MOGUL)
Genuine AE Hepolite(Federal Mogul) Never, ever replace a camshaft without installing new followers....

£1.84exc vat
£2.16inc vat

FLANGED HEAD BOLT CLUTCH CASE TO ENGINE
Clutch housing to ENGINE case bolt WITH FLANGED HEAD 5/16" UNF about 1"long WAS TAM1177

£0.43exc vat
£0.51inc vat

CLUTCH BOLT LONG COVER TO PRESSURE, RACE USE single bolt
Race quality shoulder bolts for the Mini clutch backplate to the diaphragm--sold seperately- heavy d...

£2.56exc vat
£3.01inc vat

BRAKE CONVERSION 12
12" wheel to 10" wheel running gear conversion kit. Less wheels This kit will convert your 8.4 disc...

£200.00exc vat
£235.00inc vat



Select Currency
 Basket Dice 
 Login to view saved basket 
  
  
  
  
  
  
 Currency change 
   
New Mini Sale Items
Wallpapers Minispares
Mini in the Park Gallery