Mini Spares - Product - C-AJJ1570 - STEERING RACK 2.2 TURN QUICKRACK RHD BRAND NEW

Join Mini Spares Today.

Click to see details for advantages of joining us

Extended Navigation

Cliking on this button will extend the treeview
to 3 levels with many subcategories

Buy Vouchers

Fast Part Entry

STEERING RACK 2.2 TURN QUICKRACK RHD BRAND NEW

C-AJJ1570

Description

If you are interested in performance driving then you know reaction time from the driver to the car is critical; the time it takes to turn the steering wheel to the desired angle is important! The standrad rack is 2.7 turns lock to lock, our quick ratio is 2.2 turns! Always replace the dust shield 21A30 between body and rack around the spindle that locates the inner column

£102.00 exc vat
£119.85 inc vat

People who bought the above item also bought following items.

CLUTCH PLATE ROAD AND FAS... GCP204AF
	Unipart or AP Clutch Plate The AP plate is Asbestos free but the old metro MG and Turbo upgraded ty...
	£17.00exc vat £19.98inc vat

BRAKE BACK PLATE BUILT UP... 21A1060KIT
	Genuine AP brand new Rear Left hand back plate assembly (beware of copies) These are ready to bolt ...
	£52.08exc vat £61.19inc vat

CLUTCH OIL SEAL GENUINE G... 13H2934MS
	Intoduced for competition engines where the increased rev limits or temperature can cause the LUF100...
	£3.75exc vat £4.41inc vat

ROLLER SINGLE TYPE 4 SYNC... ADU7619
	1ST Motion shaft SINGLE track bearing for 4 synchromesh 1st motion shaft
	£12.60exc vat £14.81inc vat

WINDSCREEN WASHER VALVE, ... GWW506
	Introduced when GWW804 Jets were first fitted in 1970 but can be used in any container to stop sludg...
	£1.75exc vat £2.06inc vat

REAR GLOVE BOX MOULDING R... ALA5828
	POCKET TRIM, REAR-RH
	£8.75exc vat £10.28inc vat

CHECK ARM SEAL L/H 1986 O... CGE10039
	sponge type seal on L/H A post of all minis with wind up window type doors to protect from water run...
	£3.99exc vat £4.69inc vat

HUB KIT REAR INC HUB SEAL... GHK1548
	Original Timken Rear tapered roller wheel bearing kit, for one wheel. The Mini Cooper S was equipp...
	£15.15exc vat £17.80inc vat

SUSPENSION PACKAGE OF AGX... MSSK3012
	Ultimate road damper and geometry kit which includes following parts. A set of AGX Evolution dampers...
	£341.81exc vat £401.63inc vat

CLUTCH RETURN SPRING ANCH... 2A3601MS
	this plate is on the end of the PRE A plus long type clutch arm 22A2204MS to hold the return spring ...
	£2.63exc vat £3.09inc vat

REAR SUBFRAME SUPPORT PIN... 21A1440
	The pin that the rear subframe bushes sit on inside the trunnions on the rear subframe of every mini...
	£14.51exc vat £17.05inc vat

MASTER CYLINDER GASKET EA... NAM9197
	the gasket that sits wunder the plate which the brake and clutch master cylinders sit on---single br...
	£2.55exc vat £3.00inc vat

TIE BAR KIT 21A1091 WITH ... 21A1092
	Adjustable Tie-rod kit with C-STR627 rubber bushes and all bolts,nuts and washers required. This is ...
	£24.50exc vat £28.79inc vat