Mini Spares - Product - 12H865 - OIL PRESSURE RELIEF VALVE CUP-GENUINE

Join Mini Spares Today.

Click to see details for advantages of joining us

Extended Navigation

Cliking on this button will extend the treeview
to 3 levels with many subcategories

Buy Vouchers

Fast Part Entry

OIL PRESSURE RELIEF VALVE CUP-GENUINE

12H865

Description

The cap that sits on the end of the oil pressure release spring which should be lightly ground in to get proper seating.Cooper S engines had the shorter stronger spring AEA536 and the rest had 6K853 but most fit the AEA536. The alternative to this cap is a ball bearing BLS916. The washer that goes between the cap and block when undoing this is 6K431.

£2.55 exc vat
£3.00 inc vat

People who bought the above item also bought following items.

HEAD GASKET SET 850/997/9... AJM1250MS
	Special universal head kit includes head gasket, valve cover gasket, manifold gasket, thermostat gas...
	£7.13exc vat £8.38inc vat

BIG ENDS 1275 EXCEPT "S"-... VP91306-00
	original quality Vandervell shells as used by competition engine builders. these are standard size ...
	£25.50exc vat £29.96inc vat

CLUTCH OIL SEAL GENUINE G... 13H2934MS
	Intoduced for competition engines where the increased rev limits or temperature can cause the LUF100...
	£3.75exc vat £4.41inc vat

SUSPENSION PACK OF GEOMET... MSSK3013
	Ultimate road or race geometry kit which includes following parts. Adjustable tie rods and lower arm...
	£86.80exc vat £101.99inc vat

MASTER CYLINDER GASKET EA... NAM9197
	the gasket that sits wunder the plate which the brake and clutch master cylinders sit on---single br...
	£2.55exc vat £3.00inc vat

GASKET FOR THERMOSTAT LAT... GUG705558GM
	Genuine version of the thermostat gasket for all A series --Black one side and red the other they ar...
	£1.00exc vat £1.18inc vat

1300 MAINS A PLUS VP91886-10
	lead indium bearing and is considered the best type available for race engines but most road can wil...
	£27.00exc vat £31.73inc vat

PETROL PIPE BRAIDED 5/16"... 21A2332
	For 21A2331 pipe Before the days of Aeroquip, Minis had braided perol pipes. They should be used i...
	£2.05exc vat £2.41inc vat

RELEASE VALVE COPPER WASH... 6K431
	The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access ...
	£0.31exc vat £0.36inc vat

RADIATOR SURROUND RUBBER 14A7286
	Original one piece rubber surround rubber for MK1/2 and early MK3 pre 1975 minis. This rubber attach...
	£5.25exc vat £6.17inc vat

AIR DUCTING FROM AIR CLEA... LKM10002
	Air ducting tube from inlet manifold to air cleaner. These are 3" long Genuine Rover product for HIF...
	£3.19exc vat £3.75inc vat

VALVE STEM TOP HAT OIL SE... LJQ101160
	Valve stem oil seal manufactured with original Dupont Viton, as fitted to the twin points engines, a...
	£3.07exc vat £3.61inc vat

STABILISER BUSH ONE PIECE... KKF101320EVO
	The last Rover update on the upper engine stabiliser bar,but this is upgraded for performance use. ...
	£3.60exc vat £4.23inc vat

CLUTCH FLYWHEEL BOLT, SHO... C-2A3659
	Race quality bolt-sold seperately- these shorter bolts hold the spring straps 2A3658 to the flywheel...
	£2.55exc vat £3.00inc vat

FUEL PUMP MECHANICAL 998 ... AZX1818MS
	Non Genuine version mechanical fuel pump Drives off the camshaft at the rear of the motor. These p...
	£14.00exc vat £16.45inc vat